• Manufactured by ESS
• VOC'S to PPT
• NOX, SOX, HCL, HF
• Up to 64 species in real time
• Identifies the unknown
• Tracks identified species
• Advanced software suite
• %, PPM, PPB, PPT, and mg/M3
• Remote operation via phone line
• Gas purged case
• 240VAC/110VAC 12VDC battery pack or car adaptor operation

ecoSys-P is the latest addition to the advanced quadrupole mass spectrometer range from ESS. The system takes full advantage of ESS' experience in miniaturising mass spectrometer systems whilst retaining the functional ability of a laboratory system. ecoSys-P is easily carried by an individual, a laptop PC will fit easily into the case, it has numerous power options, and can operate in the closed position when it is being purged for hazardous use. The system comes complete with the necessary software for carrying out analysis, the ability to automate many functions, such as calibration, or perform automatic pre-programmed survets. The system can operate in a full remote mode, via a phone line, or mobile phone, allowing for control, servicing, and file transfer. ecoSys-P gives you a full function lab standards in any field situation.

ecoSys-P is ESS' most compact M/S sytem to date, so compact that a laptop PC fits easily into the case. This allows convenient working space for the operatr, as well as allowing for a quick packup time. Or, if preffered, the back panel allows for an external PC connection, and the connection of periferal equipment such as the Navigator multi-gas stream selector. Serial communication between the PC and the M/S allows separation distances of up to 40m, between the operator, and the sample point. The standard system can detect VOC's to a single ppb level at very high speeds (100ms per mass) and has a sample transfer time between process event and M/S detection of <100ms for capillary versions and <1 second for membrane inlets. The addition of an automatic thermal absorber allows detection to ppt levels but increases the point analysis time to 90 seconds. Inlet options are available for Ambient, Stack, Ducted, Head space, Process, Source, and Very high temperature (1300 degC) monitoring