Check out our range of cleanroom accessories .......................www.moorfield.co.uk ........................for New and Refurbished Previously Owned Vacuum Pumps, Vacuum Technology and Semiconductor Equipment from the UK

New boxed Ulvac 8m3 / hr rotary pumps at 40% off list...

 

Home
Up

Factory Return Services

Analyser Refurbishment and Re-Calibration Service

Over a period of time, the sensitivity of your analyser and the resolution will degrade as a result of contamination. Our refurbishment service ensures that your system is returned to its original factory specification, all this for a fraction of the cost.

Here is what you get :

  • Source electrodes cleaned or replaced
  • Filaments cleaned or replaced
  • The analyser stripped and cleaned
  • Pre-set adjustments on all electronics checked and optimised
  • Full test to original specification on an oil-free system
  • A full report and the test spectra are returned with the machine
  • All systems dispatched on a next day delivery service
Analyser refurbishment will correct 90% of all performance problems. It does not include electronic repair, SEM or feedthrough replacement. We can offer these services individually, or with a refurbishment at discounted rates.
SEM Replacement

The Secondary Electron Multipliers which are fitted to many instruments which will degrade with time. We can replace all types of SEM as an individual operation, or as part of a full refurbishment and re-calibration.

Electronics Repair

We can repair almost any electronic fault. Most faults are relatively minor and can be corrected at all our inclusive minimum charge or economic hourly rates. As with our other services, we offer discount if this work is undertaken during re-calibration.

Latest Modification State

For a small additional charge, many units can be upgraded to include the lates electronic, mechanical, and software modifications during repair.

Re-Filamenting Service

If your instrument has tungsten filaments, we can re-filament your existing mounting plates for a fraction of the cost of a new filament assembly. Your existing mounting plate will be cleaned, checked for electrical integrity, and the new wires fitted. Your new filament will then be de-gassed and soak tested for 24 hours.

 

 
Instrument

Type

£395 £495 £595
Anavac    
ARGA    
Masstorr F    
vac analyst MasstorrD  
  QX Series  
  SX200 mass analyst 300 - 400
  mass analyst 200 SXP
    SXP Elite

 

Costs
 

 

Send mail to Web Master with questions or comments about this web site.
Copyright © 2001 Moorfield Associates
Tel: +44 (0) 1565 722609 ... Fax: +44 (0) 1565 722758
Last modified: January 12, 2007
Latest Offers!!!!!!!!!!!!!

FOR SALE BY INFORMAL TENDER

By order of Unilever UK Central Resources Limited

ZABspec Ultima OA TOF Mass Spectrometer

 

50% off list - Unused leybold turbo sets

MiniLab R&D box coater
TE4 thermal evaporation source
Thin film monitors at low prices