|
The BOC-6 is a simple yet robustly designed 6KW output sample resistive
heater controller and power supply combined. A simple
“toggle”system allows the user to select a permanent 3
KW of heat to maintain temperature at a user defined set point and
a further 3KW of intermittent incremental power that cuts in at a
user selected temperature delta to primary set point. This method
of power distribution together with up to four sample heaters of
1.5KW max output each, (or slaving an additional 4 when used with the
optional slave unit) enables the user to obtain a more uniform temperature than found with traditional controllers.
Cycle duration and on off is set via a 99 hour timer located on
the front panel. Temperature is monitored by a K Type
thermocouple input to the temperature controller. Set point and
over temperature alarm can be user defined.
SAFTEY: To ensure vacuum integrity during bakeout, the unit
can accept trip input from most popular vacuum gauge controller
relay outputs.
The unit can be supplied in either a 2U rack mount 19" box
or a 2U freestanding box as required.
Technical Specification:
Mains input 110 or 220 VAC
Maximum Power Output 6 Kilo Watt
4 Heater outputs at 1.5KW each (MAX)
99 hr multiple set timer
Thermocouple feedback loop to digital temperature controller with
multi set point capability
Vacuum interlock
2U box
Back panel : Mains cable, mains fuse, thermocouple i/p, vac
interlock
Front panel : Mains on, power on, timer, controller , heater
output x 4
|
